Membrane Solutions RO Membrane, 400 GPD Reverse Osmosis Membrane, 3.0″x12″ Water Filter Replacement for Under Sink Home Drinking RO Water Purifier System


Price: $52.99
(as of Dec 08,2021 00:18:39 UTC – Details)


Product Description

RO membrane filter cartridge for apec roes-ph75RO membrane filter cartridge for apec roes-ph75

RO Membrane Filter Replacement parts for GE water filtration systemRO Membrane Filter Replacement parts for GE water filtration system

Membrane Solutions Reverse Osmosis Membrane Element

400 GPD mainly for light commercial use.

Residential Reverse Osmosis(RO) systems are widely used to provide safe-to-drink water for families and light-commercial use. As the main filtration stage of the RO filtration system, MS RO membranes deliver consistent performance for all users with advanced membrane technology and automated spiral-wound fabrication.

MS RO membrane elements, NSF/ANSI Standard 58 certified, have a high permeated flow while keeping a 99% TDS removal rate, and stabilized salt rejection rate by 97%. It can efficiently remove contaminants like heavy metals including primary fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates, as well as organic, rubber mass, harmful minerals, and another soluble salt from water.

Specifications

Filter Size: 12” x 3” (Fitting Standard 3″ ID Membrane Housings)

Material: Polyamide Thin-Film Composite

Micron Rating: 0.0001 μm

Capacity: 400 GPD (Gallons per Day)

Salt Rejection: 97%

Feed pressure: 100 psi

Lifespan: 2-3 years

Note: The lifespan of filters depends on your water quality.

Compatible with most standard 3012 RO housing

Compatible with most standard 3012 RO housing

adapts premium material that is food-grade to guide your safety

adapts premium material that is food-grade to guide your safety

every reverse osmosis membrane filter lasts up to 3 years

every reverse osmosis membrane filter lasts up to 3 years

Wide Compatibility

With the industry-standard 12″ x 3″ size, MS high capacity RO elements fit most standard 3012 RO housings for the light commercial reverse osmosis water systems.

Premium Material

MS RO membranes deliver consistent performance for all users with advanced membrane technology and automated spiral-wound fabrication.

Long Life Span

MS membrane elements are shipped dry in an original sealed package. The membrane normally lasts about 2-3 years depending on your source water quality.

Permeate Flow Rate

200 GPD

300 GPD

400 GPD

Size

12 x 3″

12 x 3″

12 x 3″

3″ Inner Diameter (ID)

Compatible with

3012 RO Housing

3012 RO Housing

3012 RO Housing

ROULP-3012-200/300/400

Membrane solutions product linesMembrane solutions product lines

Important Information

It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard.The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation.Keep elements moist at all times after initial wetting.To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided.

Disclaimer:

This product is a generic item that is designed to replace the original part.Any brand names or logos are the registered trademarks of their respective owners.Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility.

Membrane Solutions ROULP-3012-400 reverse osmosis membrane for home drinking water treatment or maple syrup filter systems are among the most reliable and consistent elements in the industry.
With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 3012 RO housing for the light commercial reverse osmosis water systems.
Our membrane elements are shipped dry in an original sealed package for convenient handling and long shelf-life. The membrane normally lasts about 2-3 years depending on your source water quality.
400 GPD RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources.
MS Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance with high permeate flow, tested by an independent third-party to meet NSF/ANSI 58 standards, providing safe-clean drinking water.
💡 Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.

Leave a comment